8/3/2023 0 Comments Qfinder pro cannot find nas![]() ![]() Try doing a basic reset on your QNAP, which will reset all of your settings to DHCP (hold in reset button about 3 seconds or till it beeps once). Seems it's retaining some IP config assignments in use from your old router. ![]() If your QNAP says it has an IP address of 192.168.1.x, there's your issue, since Eeros default to 192.168.7.x, and for any device to be usable it must match the Eero's gateway and IP range. I have several QNAPS that I use with Mac computers, and this clearly sounds like an IP or DNS issue. Your machine will always consult a local HOSTS file first before attempting to use a DNS entry to resolve a server name to an IP address.Īgain, this is techie stuff but unfortunately important to know because unfortunately networking is almost never a plug-and-play affair anymore. One last suggestion is that once you set your NAS up to use a static IP address consistent with your DHCP configuration (the same first 3 numbers in the IP address scheme), you could edit your local HOSTS file on your PC to add an entry for the NAS. The ".local" part is apparently important for Mac. So something like afp://192.168.1.50/your_share (for Apple) might give you more success, avoiding local DNS issues altogether.Īlso, if you want to use server names instead of IP addresses, try afp://yourNAS.local/your_share. Net/net, I think it might be worthwhile to look into setting up a static IP address for your NAS, and always hitting it from your computers using the IP address rather than by NAS 'name'. You might also look into configuring your NAS to be the 'master browser' on your network (you'll have to google this one) to resolve DNS issues. Regarding Apple computers networking issues, in the realm of 'tweaking-techie' things might be to change the version of SMB that your NAS device uses - SMB 3.0 is the latest standard but people have reported better compatibility with Apple products by lowering the SMB level used in the NAS to SMB 2.0 or even 1. ![]() 100 for static assignments, for things like my printer (which definitely prefers a static assignment) and my NAS. And in my network I have all DHCP assignments starting at 192.168.1.100, reserving everything below. When I setup my eero, I found the 'advanced' setting to configure the DHCP range to start with 192.168.1.0, which is what my static-IP-configured NAS was expecting and consistent with how I am used to accessing my home network. While people are always saying AFP (Apple's own legacy networking protocol) is "on its way out", I've found it still the most reliable way of connecting to a NAS with a Mac computer. In my case it had to do with the SMB implementation Apple uses, it's non-standard/proprietary, so rather than using the standard libraries everyone else does, they rolled their own. With Linux and ZFS, QuTS hero supports advanced data reduction technologies for further driving down costs and increasing reliablility of SSD (all-flash) storage.For what it's worth, although I don't have a QNAP, I do have a Synology NAS and had similar issues with accessing it from my Mac computers (Windows PC's were OK). QuTS hero is the operating system for high-end and enterprise QNAP NAS models. WIth Linux and ext4, QTS enables reliable storage for everyone with versatile value-added features and apps, such as snapshots, Plex media servers, and easy access of your personal cloud. ![]() QTS is the operating system for entry- and mid-level QNAP NAS. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |